@GaMeBoY439748delete bf2042 folder in documents. Reboot system, start game platform as admin.
Start your game !
Now set your settings, dont forget your shaders/cache will need to be downloaded again during gameplay !
My system is not overclocked, RAM is compatible with my motherboard. Video card drivers new 528.02. In the Nvidia control panel, in the power management mode, the maximum performance is set, GPU scheduling is disabled in the graphics settings, in the game itself, as I wrote earlier, I tried to set all the parameters to ultra, both high and medium and low, still gives an error. Nvidia, EA, Steam overlays are disabled. I can not solve the problem with departures.
Here is the new file.
@PaMiJl777 Ok that was the info that i needed ! Good !
I did check for youre memory , but i don not see this PartNumber=F4-3600C18-8GTZN in the list below !
Only thing you could do now is , check/test each ram module apart from each other to check if one is faulty !
So get all out , and just leave 1 module in , normaly at memory port A2 (check manual for exact settings for a single ram module).
BUT , the partnumber is not in the list , so i see as its not compatible ! And this could cause those GPU / DIRECTx errors !
website is in dutch, sorry ! but its the same in Englisch 😉
Leveranciers Onderdeelnr. Omvang RAM-snelheid Uitvoersnelheid SS/DS Merk chip Timing Lading Stopcontacten
G.SKILL F4-3600C17Q-64GTZR 4x 16GB 3600 3600 DS - 17-19-19-39 1.35 1,2
G.SKILL F4-3600C16Q-32GTZN 4x 8GB 3600 3600 SS - 16-16-16-36 1.35 1,2,4
G.SKILL F4-3600C19Q-32GSXW 4x 8GB 3600 3600 SS SK Hynix 19-19-19-39 1.35 1,2,4
G.SKILL F4-3600C16Q-32GTZNC 4x 8GB 3600 3600 SS - 16-19-19-39 1.35 1,2,4
G.SKILL F4-3600C17Q-16GVK 4x 4GB 3600 3600 SS - 17-18-18-38 1.35 1,2,4
G.SKILL F4-3600C18D-16GVK 2x 8GB 3600 3600 SS Samsung 18-22-22-42 1.35 1,2
G.SKILL F4-3600C16D-16GVK 2x 8GB 3600 3600 SS Samsung 16-16-16-36 1.35 1,2
G.SKILL F4-3600C18D-16GTZRX 2x 8GB 3600 3600 SS SK Hynix 18-22-22-42 1.35 1,2
List is from the Ryzen 5000 series CPU
Cheers !!!!!!
@PaMiJl777 @Rokebo73 It was very similar case for me aswell and Bios update fixed it for me cus since the bios update included the new ram modules to its support list it fixed the issue for me.
