Not able to stay connected to EA servers - Jio Fiber

I use 1.1.1.1 with warp. Maybe you can try disabling ipv6 as ShooterGM​ suggested.

Hope it helps.

Which setting do you use?

with warp ping gets high 

I had to disable ipv6, with it, it just wont stay connected. Also, getting better ping after disabling it. 

Guys I think I found a temporary soution. I have the same issue as I also use jio fiber internet. Yesterday I thought of using nord vpn since I have a premium account there. I connected to fastest server which was mumbai. That solved the problem. Ping is 20-30 ms higher but still playable with no noticeable latency. Give this a try using any vpn service, should work

beastofajmer​ 

In my case, using Cloudflare WARP alone was sufficient to stabilize Ultimate Team, without disabling IPv6.

Steps that worked for me:
Close EA App and FC26.
Install Cloudflare WARP and connect.
Launch EA App, then start FC26.

WARP did not increase ping for me, as it replaces a congested ISP routing path with Cloudflare’s optimized backbone. Even with encapsulation, the cleaner route can result in equal or lower latency.

You can check which Cloudflare edge you’re exiting from by visiting:
https://1.1.1.1/cdn-cgi/trace

and looking at the colo= value

 ShooterGM​  we can't change ipv6 from router settings.

If you are playing on PC, its very simple and you dont need to log into jio at all. 

Settings > Network and Internet > Wifi (or ethernet if you use it) > Hardware properties > More Adapter Settings > Uncheck IPV6

If you are on console then you have to do it in router. You can try following the guide here > https://tech-latest.com/jio-router-login-ip-address-admin-settings/

good luck!

Can you please share the steps to disable ipv6 on jio router as im not being an option to disable it. 

ping is same for me, have it tried it yet? also WARP is different than just a regular DNS

But ping is high on cloudflare