Forum Discussion
1. Have you got good pings when your looking at the server list?
2. What operating system are you using?
3. Wired or wireless connection to modem?
4. Is it the same "error" message everytime or does it vary?
- Anonymous12 years ago
1. yes, pings shown 50-80 ms.
2. windows 7 ultimate x64
3. wired, 100mbit/s link. Seams it work good.
4. ERROR Game disconnected: could not join server. Same error, every time. After several times trying to reconnect (from 3 to 20) it works and I can play. If I do not leave the game everything is good, but when I am trying to change server, it comes again(( Sorry for my english, it is not my native language.
Updated PB and DX, it didnt help at all.
- 12 years ago
No Problem all sounds good on your end ..
You used http://www.punkbuster.com/index.php?page=support-bf4.php to up date PB Files.
1. Go to: http://www.punkbuster.com/index.php?page=support-bf4.php [punkbuster.com]
2. Download "PBsetup.exe"
3. Click "Add Game" and select "Battlefield 4"
4. Click "Update"if you've done it this way and your still receiving the error then unfortunately its due to the last update but as long as you still get in to games, this sisue will be fixed eventually.
On a side not you can in fact try forwarding your ports
TCP: 80, 443, 9988, 17502, 20000-20100, 22990, 42127
UDP: 3659, 14000-14016, 22990-23006, 25200-25300
you can use this link to search for your modem on how to do it: http://portforward.com/english/routers/port_forwarding/routerindex.htm
I hope this helps you
- Anonymous12 years ago
ok, going to try now. I will reply about it here.
- Anonymous12 years ago
YesIhavegoodpings
Using windows 7
wired connection
yes it is the same error message
- Anonymous12 years ago
I am having this very same issue.
I have a great PC and connection, and the problem started only about two weeks ago or so. I can't nail down the exact day though.
One thing I have been able to determine which hopefully will help EA on their end, is that the ONLY time I am able to join a game without getting a disconnect error is when the game is either in Scoreboard, or switching maps in loading.
Every time I finally connect to a game, I am either coming in and seeing the scoreboard, or It starts loading the game for a few seconds and then blacks out and switches to the new map loading.
Hopefully this helps. I am pretty sure this is not a problem on our end!
- WaffleGoat6612 years agoSeasoned Novice
To setup port forwarding correctly on a router/behind NAT do the following.
setup a static IP address
- use the following tool http://portforward.com/help/setup_static_ip_address.htm
- Download/install and then click "make it static"
Find your router's internal IP address
- start -> Run -> CMD and in the command prompt type
"ipconfig" without quotes.
The internal IP address will be the "Default Gateway" under your Ethernet Connection.
http://portforward.com/networking/routers-internal-ip-address.jpg
Example: 192.168.0.1
Connect to your router's web interface:
In your browser, type in the router's internal ip address that you aqquired above and press enter
It should prompt you for a username and password. Enter it or if you never set one, you can find a list of default
username/passwords for most routers here: http://www.speedguide.net/default_passwords.php
Once in your router, look for a section called Applications & Gaming or something like it.
You'll need to find "Port Range Forwarding" and input the following ports
TCP Ports- 80, 443, 9988, 17502, 20000-20100, 22990, 42127
UDP Ports- 3659, 14000-14016, 22990-23006, 25200-25300Where it asks for ip address, once again, enter your router's internal IP address
example: Application | start | end | protocol | ip address | enable |
BF4 | 443 | 443 | TCP | 192.168.0.1 | check yes |
Save settings and now BF4 should connect and then load level like it hasn't been doing.
EDIT: I was having the exact same issues, disabled firewall even in services.msc, updated punkbuster but still - most of the time I couldn't connect to any servers. It would say "connecting" and eventually give me an error. After doing the above, I have been able to connect repeatedly to any server I have tried without issue. Hope this helps.