Dead Space 3 resolution wont go aboce 1370x768 60Hz

Does your TV actually support resolutions higher than 720p ? If not then that is probably why you cannot use 1080p in-game.

Barry.

Yes I run crysis 3 on ultra on this thing. It's just deadspace that has a problem.

It's an HDTV set to 1920X1080 1080P 59Hz

Are you using a PC? If so, please post your Dxdiag file so we can see what the native resolution of your monitor actually is.

Barry.

---------------
Display Devices
---------------
Card name: NVIDIA GeForce GT 640
Manufacturer: NVIDIA
Chip type: GeForce GT 640
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0FC0&SUBSYS_100F10DE&REV_A1
Display Memory: 3733 MB
Dedicated Memory: 973 MB
Shared Memory: 2759 MB
Current Mode: 1804 x 1004 (32 bit) (30Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: PRI HDMI TV
Monitor Id: PRI0670
Native Mode: 1360 x 768(p) (60.015Hz)
Output Type: HDMI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 9.18.0013.2049 (English)
Driver Version: 9.18.13.2049
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 6/21/2013 08:06:36, 15144928 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-4C80-11CF-6F7B-02301CC2C435}
Vendor ID: 0x10DE
Device ID: 0x0FC0
SubSys ID: 0x100F10DE
Revision ID: 0x00A1
Driver Strong Name: oem129.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section066:9.18.13.2049😛ci\ven_10de&dev_0fc0
Rank Of Driver: 00E02001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C

Monitor 2

Card name: NVIDIA GeForce GT 640
Manufacturer: NVIDIA
Chip type: GeForce GT 640
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0FC0&SUBSYS_100F10DE&REV_A1
Display Memory: 3733 MB
Dedicated Memory: 973 MB
Shared Memory: 2759 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: Dell U2212HM (Digital)
Monitor Model: DELL U2212HM
Monitor Id: DELD047
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: DVI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 9.18.0013.2049 (English)
Driver Version: 9.18.13.2049
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 6/21/2013 08:06:36, 15144928 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-4C80-11CF-6F7B-02301CC2C435}
Vendor ID: 0x10DE
Device ID: 0x0FC0
SubSys ID: 0x100F10DE
Revision ID: 0x00A1
Driver Strong Name: oem129.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section066:9.18.13.2049😛ci\ven_10de&dev_0fc0
Rank Of Driver: 00E02001

So I used the GeForce experience to change the resolution to the desierd one. But when I started my game my T.v. Flickered and a message appeared  from the t.v. saying it went to 1370x768 60Hz. But when I close out of DS3 the same box appears saying it reverted back to 1920x1080 60Hz... So it has to be something with Origin or DS3 not letting me KEEP the changes I make.

The native resolution of your monitor is: Native Mode: 1360 x 768(p) (60.015Hz) - this is also known as 720p

You should not expect to play the game at a higher resolution.

Barry.

I understand this. But when DS3 is the ONLY game that won't run at 1920x1080 60Hz. It confuuses me.