You can give this a try and do it with a driver you have not used yet be it beta or new...
Video Card drivers and doing a clean install.Credit goes to aT1C for his steps
Note.. with the video card driver it installs so much junk :womanfrustrated: and some of it just makes issues so if you want it this is how I do my driver now as I have my BF fully stable and I want to keep it this way .
First I only install two things from it 1- Graphics Driver 2- PhysX System they can keep the rest :womanlol: See steps below.
This is how you do a clean graphic driver clean install:Credit goes to aT1C for his steps
Start by downloading your graphic card drivers from here,
AMD; http://support.amd.com/en-us/download
NVidia; http://www.nvidia.com/Download/index.aspx?lang=en-us
Download the one you have and save it on desktop, you are going to need it!
After downloading the video card driver follow these instructions to the letter,
1- press windows button,
2- right click my computer,
3- press property’s, you will get a new window here.
4- in the new window click device manger on your left side of the screen, you will get another new window here,
5- you will see in the latest window a list of devices you have in your computer, click on the arrow beside Display driver and a small fall down menu will show you what kind of graphic card you have.
6- left click on your (graphic card name) so it’s highlighted in blue,
7- right click (graphic card name) and press property’s, you will get a new small window here,
8- in the new small window click on Drivers, you will see the name between the tabs,
9- in the driver menu click on uninstall, you will now get a really small window that ask you if you’re really sure that you want to uninstall you’re graphic card drivers,
10- click ok,
11- after you have uninstall you’re drivers restart you’re computer,
12- after you have started up your computer, click on your graphic card install file,
13- follow the instructions of your graphic card installer, Pick Custom / Advanced and only check off for Nvidia 1- Graphics Driver 2- PhysX System and for AMD card only check off display driver and catalyst control center.
14- when you have Install your graphic card drivers, restart / Reboot your computer,
15- you’re done.
it didn't work :/
Ok update all this please...
Latest version of DirectX see this page
http://www.microsoft.com/en-ca/download/confirmation.aspx?id=35
Reinstall Microsoft C++
NOTE>>> you need to select the x64 or the x86 file depending on what architecture your computer has. To find this out, Click Start, right click on "Computer" and select "Properties". Under system type is should say "32-Bit Operating System" or "64-bit Operating System". If 32-bit operating system, download the x86 file, and if 64-bit download the x64 file.
http://www.microsoft.com/en-US/download/details.aspx?id=40784
Update your Microsoft .NET framework.
http://www.microsoft.com/en-ca/download/details.aspx?id=30653
Adobe Flash Player update
http://get.adobe.com/flashplayer/
Reboot PC test BF4
Is your card overclocked?
-Yes - remove your overclock...
Is your PSU rated for less than 400w and has a few years of age on it?
- Yes? Full load of a 7870 at stock clocks is roughly 275w.. not counting any other component in your system. PSU's capacitors age over time, a system barely getting by over the course of a few years will not longer work later. Overclocking your CPU or GPU drinks the power... efficiency goes out the window for performance.
Are you using an MSAA setting in the game's options?
- Yes? Need to either disable it or install 13.12 drivers.
**edit** Actually.. I think this bug only affects pre-GCN cards.. so ignore it I guess.
--
If you answered 'No' to all the above then try this.
Control Panel -> Uninstall AMD Catalyst Drivers
Restart into Safe Mode
Run Display Driver Uninstaller
Restart
Install latest AMD Catalyst Drivers.
http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
If you BSOD on restart, it's caused by not uninstalling the AMD drivers first... to fix it go back to safe mode and remove the display adapter from device manager like Zorlacc's post had you do.
all my answers are no and i dont know how to do the safe mode thing :/
Safe mode -
If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
-----------------------------------------------------------------
Thank-you
Killerwhal812
Marshall
If I or Anyone helped in any way please in return make the time to award then with XP please.
If I solved the problem please press 'Accept as Soloution' next to my post so others know of the soloution.
I DO NOT WORK FOR EA
MY VIEWS ARE MY SOLE OPINION AND NOT EAs
what version of the program am i supposed to download
