Forum Discussion
Hi @PrxyIsBigCool ,
Try these steps to enable your concole controller on PC:
Hi @finlandgaming18 ,
Dont know the brand/model of the controller you have now, as you didnt specify it, but both aka the Xbox One and PS4 controllers works fine for playing BF4 on PC!
Some guiding steps:
- You will need to connect the controller via the USB cable to your PC! You can at later stage connect direct via bluetooth if you have the compatible hardware for this also on your PC. But start first by using a wired connection from controller to the PC.
- When connecting it, you will then be able to open your Device Manager in Windows and find it there.
- If there is a yellow triangle here for your controller, then its because the Windows drivers for it have not been properly installed. And that will then cause that your game will not recognize that you have any controller connected to be used either...
- In the BF4 game on PC it will not refer to a controller, as far as I recall, but still utilize the Options/Controls/Mouse Settings for your adjustments of aka sensitivity etc...
- You will however need to go in and check if the default Key Binding values are set for your 'joy stick settings' as these are the ones used for your controller for the game play. As again otherwise, nothing will happen when pressing any buttons or moving the joysticks on your controller.
- As you refer to your current setup is by using STEAM, then here are the pre-requisites for you to enable controller:
Go to the Settings menu in Steam (under Steam on the taskbar).
Select the Controller menu.
Click "General Controller Settings."
Check the box marked "PlayStation Configuration Support." and next to it you also have the Xbox, if that is your controller type.
Then connect the DualShock 4 to your PC and you are good to go ! - Good luck soldier !
Any further suggestions maybe?
many thanks
- Its_Travis_1994 years agoHero+
I just found this video here which you can check as well: https://youtu.be/WrHreTrFCNE
Maybe you can also do what he does at the beginning to simply check the full function of the controller first when connecting with a cable. If that's all working as expected i might see the problem at the BF4 game settings itself. Like maybe at the Keybindings there is something you forgot to change?! As he says in the video, in case you want to ise a controller for something like being on foot, maybe have to remove all the Keyboard control buttons for those actions to not get mixed up.
Wven tho, did you try to fully connect and prepare your controller on the PC first when all applications was closwd and just afterwards open up Origin, BF4 ect.?
+might also help to successfully recognize it without issues.
Greets,
Travis
About Battlefield Franchise Discussion
Recent Discussions
- 60 minutes ago
- 6 hours ago