Re: [NEEDS INPUT] Basement Split Level Rooms: Irremovable Basement Floor (1.66)

@CGrant56 Thank you! And yeah, after posting this I did test on another lot and I wasn't able to reproduce it again, a bit weird but quirks happen. I'll definitely try your method of undo'ing until it complies. ty!

Update: So the undo method isn't working for me. Luckily I have another save now where I've squished it down into one floor (I hope the sims dont get suspicious of the very low sky) but I'd love to see this fixed ☹️ It's really weird how I haven't been able to recreate it on another lot though. 

Edit - I did a fresh save and built something similar on the same lot (default house) and it happened whilst changing a full wall to a half wall on the upper level. This lot had the pool on the lower level and half wall AND full wall rooms on the upper. The undo method still isn't working. 

I removed all the inner rooms on the upper floor so it's just one massive square. Painting the walls then didn't create the dirt flooring. However as soon as I any room that isn't attached to the outer walls, the bug appears. If a room IS attached to these outer walls, the bug doesn't appear. I have a feeling it has something to do with how the game identifies rooms, especially at basement level? 

Update: Okay! Using this same theory that it has something to do with an 'inner' room, I was able to recreate it on hindquarter hideaway! 

The bug persisted with and without a pool, and without an inner room on the lower floor, as long as the upper floor has a room that ISN'T attached to the very most outer walls, the game breaks and creates this irremovable floor. Bug officially persists on multiple lots~ 

(CM: Multiple posts merged. Check out this post for tips on how to edit and add more to a post.)

@milliemcintyre 

Ok.  That's interesting.  I'll take another look and see if I can replicate what you did and see what I get tomorrow.  You might be right about the game and how it recognizes rooms.  Makes sense to me anyway.  Build mode can be weird at times in what it lets you do.

Another thing I thought might be connected is cc.  When I loaded your save, the first time I entered the lot it said that it removed 672 build items and substituted 31 more.  That's a lot of cc on that lot and cc can cause problems even after it is removed as it sometimes leaves a stray bit of data attached to a lot or in a save.  I know you said you tried it in a vanilla save without any cc, but did you leave any build related mods in like T.O.O.L. or something else?  Could be something like that is interfering somehow.  Just a wild guess though and probably not since it did happen in a vanilla game for me without any mods or cc in but you never know.  Doesn't hurt to consider it anyway. 

Another thing you might try is deleting the localthumbcache.package file if you haven't done that yet.  That sometimes clears up problems, especially when you have a lot of cc and take it in and out of the game.  The game will generate a new one so it doesn't hurt anything.

Hope this helps.

Edit:  Ok.  I took another look at this today and was able to reproduce the issue.  But I did it a different way than you did.  But ended up with a dirt floor that could not be removed short of deleting the entire build and starting over.

I went to the same smaller lot in my test save as you did in yours and built a 2 level basement then deleted the floor in between and added rooms in the lower level.  One against the wall and one in the center of the floor.  I deleted the floor of the upper level and the ceiling of the lower room.  Then added rooms right above the lower rooms below.  Not a problem and I didn't get the dirt.  Then I added floor tile back to the upper level.  Since you can't tile a space that way, to get a floor so I could tile, I had to add the ceiling back in the room below, then place floor tiles on the upper level.  The usual concrete floor showed up and I tiled over it.  Then I deleted the floor and the dirt showed up.  After that, I could not get rid of the dirt no matter what I did.  Adding and deleting floors and ceilings again did nothing and the dirt floor remained.  So there is definitely something now quite right about how it works.  But it does seem that the order in which you do things does matter as I could get the 2 story space at first. It was when I put the floor back via adding the ceiling below was when it showed up.

Hope this helps.

@CGrant56 Yeah so I just renamed my folder so when I loaded the game it created a clean Sims 4 folder and tried again now on Sporting Space (we movin~) and the issue still persisted so it does appear on pure vanilla versions of the game.

ALSO, I was just typing that ^^ as you added the edit, we're in sync. I just tried what you did in the edit too and the same results. I've also tried this in Willow Creek to see if it was an issue on other worlds besides Brindleton Bay, and changed the order of how I did things and no matter what, it still came back.

I did notice something when I was trying it in Hallow Slough, after I removed the floor of the upper level, it stops seeing it as a room. I think that may be it. I accidentally clicked on one of the outer walls and noticed it didn't highlight the whole room and I was able to delete the wall. Here's a video of that. I think I found the issue~

@milliemcintyre 

I went back again and looked to see if I could reproduce what you did.  I couldn't.  No problem with selecting the space without the floor as a room.  Only thing was that I couldn't put a floor back in without adding the ceiling back below and that brought the dirt floor back.

My test build still sees the open space as a room.  The entire space gets highlighted normally.  

Tried something else too.  Since you can't delete a single section of a basement's perimeter walls without deleting the whole thing, I built a one tile wide room all the way around the basement by building rooms outside of each perimeter and deleting the intersection walls so it made those 4 separate rooms into a single one tile wide room, sort of a box within a box type of thing.  Then I tried breaking the original perimeter walls and redrawing them.  Dirt floor appeared immediately when I did that.

This is very much like what happens in apartments as you cannot change the exterior walls in them other than by painting on the inside.  The perimeter walls are fixed and can't be altered.  Basement perimeter walls work pretty much the same way so I wonder if there is a connection.  There are a number of posts here that can give you an idea of the problems that has created as all kinds of problems editing apartments in build have been reported including not being able to place floor tiles, change interior walls or even place rooms from the Gallery.  I see a lot of similarities with this issue from testing a number of them along the way. None are quite the same though. 

Hope this helps.