Logitech G923 Problem
I have just purchased a Logitech G923 to replace my old Logitech G29 wheel which has worked with no problems at all since I purchased it 8 or 9 years ago. I bought the new wheel to take advantage of the Trueforce technology. I run it with F1 25 (ver. 1.5) on a PC. When starting any session in F1 25, my new wheel works properly & all is well until I have to use the Rewind feature (which, unfortunately is quite often!). As soon as I start racing again the wheel does not feel quite as good & sounds awful all the time. Instead of being smooth & quiet when running it sounds as if the internal motors are full of sand/grit & vibrates my desk, making loud, unpleasant noises. When I run over rumble strips it feels nothing like running over the kerbs. Before using the rewind button, when I run over a kerb it sounds & feels exactly what you would expect this to feel like & what it is obviously supposed to be like. The awful sounds & poor feel then continues for the rest of the session no matter what I try. The only ways I have found to revert back to the proper feel are:- 1 Restarting the session 2 Leaving the track I am on & going to another circuit 3 Unplugging the wheel from the USB socket & then plugging it in again. This works during the current session but is obviously annoying to have to do this each time I use the Rewind button. It does enable me to continue my current session with the wheel working properly. 4 Closing & restarting the program. It therefore appears to me that there is a bug somewhere that is introduced in the software that controls the wheel as soon as the Rewind button is pressed. Other than this issue, the game has run perfectly for me from the day it was released. I presume my problem is easy to reproduce at your end & await comment from you as soon as possible in the hope that the issue can be solved & I can enjoy years of us from the G923, just as I have from my G29. Thank you in advance. Lee Tucker
Dropped frames when using Logitech G29
When the Logitech G29 is connected and the Logitech G Hub is open, the game will drop frames and freeze constantly and cause the wheel to fling left and right veering the car off road. I have tested this with both keyboard and DualSense PS5 controller (wired) and both don't cause this same issue, so it must be a Logitech Issue. I saw on the investigating bugs forum post that this issue is on Xbox, but it also appears to be on PC too. This has been happening since the Patch v1.06, as before this I had pumped 100+ hours into the game with the G29 wheel on this year's game alone, along with 1000s of hours on previous titles with the same wheel. This is not an overall PC issue as far as I am aware because my PC does not freeze, only the game. Everything on my second monitor continues to run smoothly whilst the game is freezing and dropping frames. Please see my PC specs below for reference (the game is installed on my D: Drive): CPU: Intel Core i5-9400F 2.9 GHz 6-Core Processor Motherboard: Asus Prime H310I-PLUS R2.0/CSM Mini ITX LGA1151 Motherboard Memory: Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-2400 CL16 Memory Storage: ADATA SU630 240 GB 2.5" Solid State Drive Storage: Seagate Barracuda Compute 2 TB 3.5" 7200 RPM Internal Hard Drive Graphics Card: MSI GAMING X GeForce GTX 1660 Ti 6 GB Video Card OS: Microsoft Windows 10 Home Retail - Download 32/64-bit I have also attached a video of what this issue looks like in Grand Prix mode (at the 5 and 6 second mark is where the exact issue happens)
Brake is either 0% or 100%
I just got the moza r5 bundle and everything seems to be working well. i don’t have any issues in the moza app on my brakes but when im in game it’s either not braking at all or it’s fully braking. did the test buttons thing on the settings and basically it doesn’t brake at all when im pressing the pedal but once i get to the end of the pedal and i’m pressing it fully the braking is 100% and there’s no in between. i don’t have the same issue with my throttle or wheel and it seems fine on the moza app. any ideas on how to fix?
TrueForce not working as intended on G923
Everytime I start a session, only the general FFB of the G923 wheel is activated, but to activate the TrueForce, I have to click into the pause menu and back to activate it. This is really annoying, especially in multiplayer. There have been reports on it already. Please take a look at it and hopefully fix it. I'm on Steam on PC by the way.Logitech G923 reset/no force feedback and steering
My Logitech G923 will work for a few races, then out of nowhere it resets itself as if i had just turned it on and it loses all force feedback and the steering goes completely off and the only way to fix it is to unplug it and plug it back in. I shouldn't have to constantly do this just to race with a wheel that should already be compatible with the game. I play F1 25 on PC.
Logitech force feedback
Honestly, I'm beginning to get very frustrated with the inconsistent behavior of force feedback with my wheel (Logitech G Pro, PlayStation variant on PC). I've mostly been playing time trial or attempting to race my friends in a lobby, but I can only manage a short amount of time before the feedback drops completely or partially drops and starts pulling to one side. Restarting the wheel / game doesn't always fix it and if it does it's only temporary. I didn't have this issue with F1 24.Ps5 G923
Hi EA team, I’m writing again because this issue still hasn’t been resolved, and honestly, it’s very frustrating as a customer who paid for the full experience. Platform: PlayStation 5 Wheel: Logitech G923 (TrueForce supported) Issue: Whenever I use Flashback (rewind) during a race in F1 25, the Force Feedback and/or TrueForce completely disappears afterwards. This issue has been reported multiple times since launch, and many players on the EA forums and Reddit have echoed the same experience. I previously submitted a report about this, but after recent updates, the bug still persists. I’ve tried all the suggested workarounds (adjusting settings, disconnecting and reconnecting the wheel, restarting the game), but the problem keeps coming back — especially after using Flashback. This completely ruins immersion and affects gameplay performance, especially in long races. A racing sim like F1 25 should not have critical force feedback bugs on such a widely used wheel. This is a basic feature that needs to work reliably. I’m kindly but firmly requesting the dev team to: Officially acknowledge the bug (not just let players speculate) Provide an ETA for a patch or fix At least publish a temporary workaround guide until a proper solution is implemented Many of us paid full price, and the product is not functioning as expected. I hope this gets escalated to the right department and taken seriously. Thanks.Game Crashes PC, Black Screen.
While playing game keeps crushing PC! I’ve tried everything (DDU, clean install, HAGS off, DX11, reset configs, overlays off, Windows updated) and F1 24 still crashes my PC completely after launch. Please escalate this issue. It is on F1 24 but also F1 25. It’s unacceptable that the game is unplayable despite all troubleshooting steps.Glitch using pxn v10 wheel.
I recently bought pxn v10 wheel and when I tried to connect the wheel, it showed in the settings, I customised it but then suddenly it started glitching in every possible menu, it starts automatically scrolling through the menus when ever I enter the menu midgame, or when the game is launched, I have tried changing keybinds and everything but it did not work, if the wheel isn't supported it shouldn't work at all but in my case when I drive the wheel is working fine, but the issue is only with the menus it scrolls down automatically when I enter which messes up my settings, I tried different ways but finally stopped playing. So please look into this glitching as soon as possible, I bought the game as well recently but I have not satisfaction playing it with this glitch happening. I have attached the video of the glitch, please look into it and fix it as soon as possible. Reach out to me via my email address if you need any additional info. Thanks in advance.