1-3 SEC FREEZES EVERY 10 SEC! RX 9070 XT + R5 7500F + ADRENALIN 25.6.3! FIX NOW!

I used the roll back in devise Manager: Display adapter: then click roll back. I ended up using the latest driver and now it's back to acting up again

run AMD Cleaup Utility https://www.amd.com/en/resources/support-articles/faqs/GPU-601.html to remove the driver and application, then install the 25.3.1 after computer restart.

Okay, went into documents, delete the 2042 folder. restarted the game. so far it is playing fine now

The game opens fine, just freezes every 10 seconds or so. can't actually play the game due to it freezing up, I have the latest driver 25.6.1

How did you downgrade the version? The application gives an error when I try to do it.

I have downgraded my driver version to 25.3.1 and edited the file in documents. Battlefields is working normally now, thanks

But what happens in your case? The game opens and then after about 20 seconds of starting the game, it closes and goes black? Or can't you even open the game??These are usually the two most common issues among the AMD community. One is due to the driver version and lack of chipset updates. The other one is because of the VRAM system, you have to go to the BIOS and activate the XMP-1 system as I advise in the previous post. I also have AM5 Socket, Ryzen5 7600 with RX6800XT, motherboard B650 Gigabyte X AX with 32 GB RAM DDR5,  Win11 24h2 version. Play this game since day 1 without problems.

Windows 11 home,

GPU Radeon 9060XT 16 GB

CPU Ryzen 5700G

64 GB DDR5 Ram 

2 SSD Hard Drives

Have the same issue since enabling secure boot, can't even play the game

I Also have a 6 Cores Ryzen with Simultaneous Multithreading (SMT) the core-count is effectively doubled, to 12 threads. I know what is happening with you. Follow this steps, i play this game since day one and no Problems. If after all this steps continues to crash then you have some hardware problem. Try to reduce the FPS, to many FPS and CPU goes UP to process all those FPS, need to find the balance.

Try this settings with the 25.3.1 version. VRAM in " Fast Timing " , and allow your graphic card to take all power need " set to Max " . 

Also very Important, go to your documents, Bf2042, settings, PROFESAFE_ profile, and make a file like this " GstRender.Thread.MaxProcessorCount 12 "  with your processor ammount of cores and threads. And in the same page look for this " GstRender.Dx12Enabled 1 " needs to be 1 at the final, if its a 0 just change it to 1. Its very important to play this game in DX12 version. 

Other Important things you can do but in the BIOS are These 3 options to enable :

1 - Above 4G decoding 
2 - Re_Size Bar Support 
3- XMP 1 Support

If you dont know how to do it try to search this 1,2 and 3, steps in youtube, you will find many videos for different BIOS. 

Other stuff  you can do is put all game settings at Max "  Ultra " , that retires a little bit charge from the CPU. More FPS more work for the CPU. With that Setup even with everything at Ultra you gona reach more than 200 fps easy.

Perhaps installing an older driver version 25.3.1 will help fix the freeze.

Crashing on death | EA Forums - 12161296