MOZA FSR V2 Wheel MyTeam Telemetry Glitch
In my MyTeam career mode, I have ancountered a glitch with my MOZA FSR V2 Dash display regarding the Telemetry sent from the game to the wheel. The telemetry being sent to my MOZA wheel is not from my car but rather from the AI car of Lando Norris. This is extremely off-putting as I am getting given information relevant to Lando Norris' AI rather than myself such as laptimes, gear, brake bias etc. This glitch only occurs in MyTeam mode. All other modes my dash is displaying the correct information. I am wondering if it is to do with the fact there is now 24 cars and not 22 with the 2026 Season DLC. I am not sure if this is a game issue or a MOZA issue. Report Code: BXBB-XKZR-BJHX-XSB EDIT: I have attached a video so you can clearly see I am spectating Lando Norris and getting his telemetry through my wheel.
Fanatec serious vibration/telemetry issues
I uploaded a bug report a few days ago regarding telemtry issues with my Fanatec, however since then there have been more issues cropping up. Whenever I start a session now the wheel base vibrates constantly unless I switch the vibration motor off and on again. The RPM LED lights also seem to flash constantly, even overlaying on the default RPM lights. The central display also displays random information, like an ever-increasing lap counter and random speeds when off-throttle. These are all the issues I've encountered with my wheel since the DLC has released: Wheelbase not having FFB (had to edit FFB in-game, save, and reset to fix) Wheelbase constantly vibrating due to it believing my car was at max RPM at all time (something wrong with backend data) Incorrect telemetry readings Custom RPM lights not appearing Fanatec game-default RPM lights overriding each other Some of these issues are related to (but not all): Rev-limiter data Wheel lock data Overall I have no idea what's happening, something has been seriously messed up when releasing the DLC. My in-game telemetry is set to 2026, 60hz, and the UDP port is the same as what's in the Fanatec App. Even setting it to 2025 does not change anything. I'm not sure if this is a problem with the DLC as a whole, Fanatec GT DD wheelbases or Formula v2.5 rims, or my Fanatec specifically. I can't really enjoy the game without having to deal with these technical issues.
F1 25/26 Xbox Save Bug
When playing in any game mode like racenet multiplayer gp and normal careers you will randomly freeze on xbox series s and when the race is over it won't save making ypu have to restart your console. On multiplayer you will look behind you and you game will freeze you in place for roughly 1-10 seconds and if your the leader of lobby the race result won't save on racenet for example. When you go on cutseens you will experience like 1 frame every 5-10 second before loading back into the game with freezing for example when you get the f1 rewind screen exiting a rewind This bug takes place what I've seen in the month it's been happening every 1-5 races resulting in completely having to restart the xbox series s Problems Save gets reset to before the race. Looking behind you freezes game up to 10 second making you stay still in multiplayer races Cutseens like rewinds or leaving menus are like 1fps and then the driving is back to 60+ fps If you would like to copy this for testing/patching it you need a t248 or G923 from other reports and then a xbox series X/S in my case it happens every like 2-5 races and i use series s and T248Game freezes when playing it with a wheel in Xbox series S
Last week I bought a G923 for Xbox, I’ve been using it these days and when I began to play with the wheel the game start to freeze during the race, in time trials o multiplayer and it makes the experience quite uncomfortable as it doesn’t looks smooth as it should be. I’ve restarted the game, I’ve restarted the console, I’ve reinstalled the game multiples times, updated the G923 wheel and the problem remains. And if it’s a wheel problem it should happen in other games but I’ve played forza horizon 6 and the game never freezes. Report code: RZBK-KCRX-LLDZ-JDLJ
F1 25 red flag error and rotation
After F1 25 update to 26 DLC on PS5, my wheel SF1000 (Thrustmaster) is constantly showing red flag via LED light and also red triangle on the T598 base. Also the rotation in corners is a lot heavier, before update everything was correct. I didn’t change any setting in the wheel or base config could you please check it?
VR crashing issues
I've been experiencing issues in VR where both the timing and the type of crash vary from day to day. The most common crash occurs mid-race: the game freezes for a couple of frames, and my Moza R12 suddenly increases the force feedback (FFB) in the direction I'm steering. Sometimes it recovers for approximately 10 seconds before repeating the cycle; then, the entire system hangs and goes to a gray screen with no error codes. The other type of crash happens at the end of a race. When I hit the 'advance' option to go back to the home page in Driver Career mode, the system freezes completely, forcing me to do a hard restart. steps I've taken to resolve the issues include: restarting the whole system closing out of steam vr and restarting application closing out of pimax play and restarting steam vr changing open xr implementation between pimax xr and steam xr verifying game files through steam setting my system settings to defaults in bios turning off amd upscaling and antilag features changing vr headset to meta quest 3 through virtual desktop (still the same issues) reducing in game visual settings as well as in pimax play and steam vr to lowest settings System Hardware 9800x3d rx 7900xtx 2tb nvme ssd pimax crystal super UW Meta quest 3 Moza r12 Moza GSV2P steering wheel Srp Lite pedals Any help would be appreciatedFanatec incorrect telemetry reading [2026 SP]
Before the 2026 season pack, all changes to stuff like LED profiles and telemetry readouts worked perfectly fine on my Fanatec GT DD Pro w/ Formula v2.5 rim. However, now the game is not sending any information to the wheel and Fanatec reverts to as if there is no profile set at all. When in the pit lane, the correct LEDs will show, however the centre display will flash between '{P}', '655' and an ever increasing lap count every 1s or so. Once on track, the centre display will sometimes correctly read my speed, but sometimes jumps randomly to a number like 500. The LEDs will also disable my profile and revert back to as if I had no profile loaded. This has never happened on any other game, nor was a problem before the DLC. I believe the telemetry hasn't been set up correctly in the backend. I have the UDP ports set up correctly and the Fanatec LED option enabled.
Straight Mode telemetry is not the same with DRS Mode telemetry?
I just discovered that telemetry with wings opening isn't the same with each other? Opening DRS works with my software wheel telemetry but when playing F1 26 cars with SM doesn't outputing any telemetry when actived. Will this telemetry unified or depends on the software manufacterer? im using Moza wheels[REPORT A BUG] Wheel freezes and cant do anything but turn and use my pedals
My wheel keeps freezing and, in my game, I can’t up shift or down shift and it goes from green mode (Xbox) to yellow mode and said it lost connection to my wheel in my game I have the csl base McLaren gt3 wheel and i can use my pedals perfectly fine and steer when the glitch happens but just can't use any buttons or upshift or downshift.