Logitech G923 Problem
I have just purchased a Logitech G923 to replace my old Logitech G29 wheel which has worked with no problems at all since I purchased it 8 or 9 years ago. I bought the new wheel to take advantage of the Trueforce technology. I run it with F1 25 (ver. 1.5) on a PC. When starting any session in F1 25, my new wheel works properly & all is well until I have to use the Rewind feature (which, unfortunately is quite often!). As soon as I start racing again the wheel does not feel quite as good & sounds awful all the time. Instead of being smooth & quiet when running it sounds as if the internal motors are full of sand/grit & vibrates my desk, making loud, unpleasant noises. When I run over rumble strips it feels nothing like running over the kerbs. Before using the rewind button, when I run over a kerb it sounds & feels exactly what you would expect this to feel like & what it is obviously supposed to be like. The awful sounds & poor feel then continues for the rest of the session no matter what I try. The only ways I have found to revert back to the proper feel are:- 1 Restarting the session 2 Leaving the track I am on & going to another circuit 3 Unplugging the wheel from the USB socket & then plugging it in again. This works during the current session but is obviously annoying to have to do this each time I use the Rewind button. It does enable me to continue my current session with the wheel working properly. 4 Closing & restarting the program. It therefore appears to me that there is a bug somewhere that is introduced in the software that controls the wheel as soon as the Rewind button is pressed. Other than this issue, the game has run perfectly for me from the day it was released. I presume my problem is easy to reproduce at your end & await comment from you as soon as possible in the hope that the issue can be solved & I can enjoy years of us from the G923, just as I have from my G29. Thank you in advance. Lee TuckerAi start on wrong tyres for sprint races in f2
I started a career in f2 and noticed for the sprint races the ai all started on softer compound tyres instead of hard compound like they would usually do in real life. Happens in Grand Prix mode also and tracks that use different compound, for example medium and hard or softs and hard.Force Feedback Bug on Logitech G923
Platform: PC (Steam) Wheel: Logitech G923 Pedals: Thrustmaster TLCM OS: Windows 11 Every time I start a new race in F1 25—whether it's Grand Prix, Multiplayer, or Time Trial—Force Feedback does not work until I manually go into the control settings and reapply or change something. This happens consistently and makes it necessary to repeat this process before every single race. Steps to Reproduce: Launch F1 25 Start any race mode (e.g. Grand Prix, Multiplayer, or Time Trial) Begin the session without touching the settings Notice that Force Feedback is either completely off or feels wrong Go into the settings menu and adjust any control/FFB option or re-select your preset Return to the race—Force Feedback now functions correctly Expected Behaviour: Force Feedback should work automatically when starting any race, without needing to enter and adjust settings. Actual Behaviour: Force Feedback only activates properly after manually changing a control settings or reapplying the preset for each race session. Hardware Setup: Logitech G923 with TrueForce Thrustmaster TLCM pedals connected via USB All devices connected via wired USB Using latest version of Logitech G Hub What I've Tried: Verifying game files via Steam Updating Logitech G Hub Disabling TrueForce Reinstalling the game Issue persists in all race modes Extra Notes: This issue did not exist in F1 24. It seems the game does not properly initialize Force Feedback unless settings are manually refreshed. This adds unnecessary steps before each session and breaks immersion for wheel users.Thrustmaster T248 doesn't work.
I have the Thrustmaster T248 and even though it’s listed among the compatible devices, it’s not detected by the game. I’ve already tried connecting the wheel to all peripherals, but it still doesn’t work. I don’t think it’s an issue with my device, since it works perfectly on Assetto Corsa and even on a previous F1 game.Full throttle
I have a Logitech G920 wheel and pedals, and whenever I play, the car is going full throttle all the time. I can't play, and on the Logitech app, it doesn't show as if my accelerator is stuck accelerating. I have updated the software and the latest drivers to the pedals and the Logitech app, but it is still causing problems.Fanatec GT DD Pro Wheel No FFB Intermittently
Hi, I'm intermittently having an issue where my Fanatec wheel loses FFB between races. Sometimes its there but very faint. However, most of the time FFB is completely gone. There doesn't seem to be a reliable way to get it back. Sometimes going into the menus and back out will cause it to start working again, but the other night I had no way of getting it to work. The next day, it was magically back again. I am running the latest Fanatec drivers and perhaps the wrench in the works is I'm using the new Fanatec App. Other drivers on my team with the same wheel hub also running the new Fanatec app don't seem to have these issues. Hardware: Fanatec GT DD Pro (in PC mode) Pokornyi Engineering HYP-R (controlled via SimHub) Fanatec Clubsport Pedals v3 PC Specs: Win 11 24H2, 7900x3D, RTX 5090 F125 on prod build Happy to provide any additional feedback. Thanks!Throttle pedal not accelerating
My throttle does not work when trying to accelerate, when in customize test buttons it registers being pressed but the throttle bar doesn't rise the brake works fine. I then switched the pedals and both worked fine, so guessing this as a bug rather than a fault with the wheel base. A quick fix would help. Thanks. Thrustmaster T128 (PS5) First attachment is original set up Second attachment is when I switch the pedalsFanatec DD+ Wheel sometimes buttons not working
Hi i have a problem with my Fanatec DD+ Wheel or Wheelbase. When im driving everything works fine but when im in the Mainscreen or options Menu or trying to assign buttons just a few buttons are working. Dont where the problem is because on the F124 game everything works just fine everywhere but in F125 like i said on some Screens some buttons dont work and also the controler then has the same issue when plugged in simultanously with the Fanatec wheel. But like i said while driving everything works fine and also on the older games F124 and F123 everything works fine.G923 Not recognized
PC version, not Steam. All latest Logitech, NVIDIA drivers. Latest from today F1 25 update G923 only sporadically recognized by F1 25. PC recognizes it. Cinematic screen reloads frequently. Keystrokes not recognized from Press Any Key screen now either. Troubleshooting Tried: Reinstalled Logitech G Hub (confirmed wheel recognition and firmware) Cleared Documents\My Games\F1 25\input folder Attempted launch with wheel unplugged, then connected at main menu Ran EA App in offline mode Recalibrated via Windows Game Controllers (joy.cpl) Disabled TrueForce and restored default G Hub profile DXDiag attached