Slow Motion

thank you so much! I follow your instructions in detail, attached what hwinfo says, any clue?

PD I noticed the CPU was really hot, so I put every fan in max 

@c43c10u5  Yes youre CPU is throttling. (87 Celcius it is at 12th gen i believe "+80")
Cause the buildin safety , it will lower Mhz from cpu , to a temp that not could damage CPU.
Ya realy need to check youre airflow , cool past at cpu if its all ok!
The 12th gen and 13th gen cpu's get higher temps (they easily get 100 to +115 celcius temps under heavy workloads <<-- bf2042).)

Beaware , 12th and 13th gen cpu are running HOT out of the box already !!!)
What cooling do ya got/use in system case ?

Sometimes a bios update could fix issues (BAD FAN CURVES)
or check HEATH in bios and check fan settings, quite settings is not always ok !! less decibels but action to cool down is to late),

Also check fan specs, some FANS need to be set at PWM in bios.
If ya got liqued cooling make sure PUMP is set correctly.
My pump is always run at minimum of 80% speed , even in idle mode (also pwm)

Its possible youre cooling block at CPU isnt connected/screwed down even at youre cpu/socket.
I used 12th gen before and its possible ya need an
Thermal Grizzly Intel 12th/13th/14th Gen CPU Contact Frame.
My temps did lower +/-8 a 10 celsius with this contact plate 😉 .

To lower temps ya could also clock down CPU in bios, instead of 5400Mhz max, set it to 5200Mhz max.
Ya could adjust vcore settings (to fix and add 1.28 to 1.30 volts)
It will lower performance but temps also !! (you will not notice much/nothing) with lower settings).

Some people use intel extreme utility to clock down cpu, but i did prefer bios settings in the past. Just 1 time settings and you will not forget to chabge settings everytime ya want to game.

update us please !!!

Cheers

ps  LGA1700 CPU /Sockets are known to bend issues.

Its possible ya need to reseat youre CPU Cooling , make sure ya screw down all with even power (not to much)

With the 13th Gen cpu i use now , i got good temps, after latest bios update (some bad fbios version, fan curves and/or with older bios versions 😉 ) 

Its possbile some issues get fixed with latest bios !

@c43c10u5 

Change the cooling to a better one, because you can currently fry sausages on this processor 🙂 100 ° C, beautiful. Before updating the BIOS, try to set the fan speed to 100% (all the time) in FAN SETTINGS in the BIOS to check whether the cooling is not too weak, if the temperatures are still above 80 ° C, it means that you have selected the wrong cooling. If you have water cooling, check if it is working, maybe the pump is broken.

If after setting the fans to 100% permanently in the BIOS, their speed does not change, then update the BIOS.

---

@Rokebo73 wrote:

@c43c10u5  Yes youre CPU is throttling. (87 Celcius it is at 12th gen i believe "+80")
Cause the buildin safety , it will lower Mhz from cpu , to a temp that not could damage CPU.
Ya realy need to check youre airflow , cool past at cpu if its all ok!
The 12th gen and 13th gen cpu's get higher temps (they easily get 100 to +115 celcius temps under heavy workloads <<-- bf2042).)

Beaware , 12th and 13th gen cpu are running HOT out of the box already !!!)
What cooling do ya got/use in system case ?

Sometimes a bios update could fix issues (BAD FAN CURVES)
or check HEATH in bios and check fan settings, quite settings is not always ok !! less decibels but action to cool down is to late),

Also check fan specs, some FANS need to be set at PWM in bios.
If ya got liqued cooling make sure PUMP is set correctly.
My pump is always run at minimum of 80% speed , even in idle mode (also pwm)

Its possible youre cooling block at CPU isnt connected/screwed down even at youre cpu/socket.
I used 12th gen before and its possible ya need an
Thermal Grizzly Intel 12th/13th/14th Gen CPU Contact Frame.
My temps did lower +/-8 a 10 celsius with this contact plate 😉 .

To lower temps ya could also clock down CPU in bios, instead of 5400Mhz max, set it to 5200Mhz max.
Ya could adjust vcore settings (to fix and add 1.28 to 1.30 volts)
It will lower performance but temps also !! (you will not notice much/nothing) with lower settings).

Some people use intel extreme utility to clock down cpu, but i did prefer bios settings in the past. Just 1 time settings and you will not forget to chabge settings everytime ya want to game.

update us please !!!

Cheers

ps  LGA1700 CPU /Sockets are known to bend issues.

Its possible ya need to reseat youre CPU Cooling , make sure ya screw down all with even power (not to much)

With the 13th Gen cpu i use now , i got good temps, after latest bios update (some bad fbios version, fan curves and/or with older bios versions 😉 ) 

Its possbile some issues get fixed with latest bios !

---

Thank you all for the help! yes the PC has some cooling issues so I will put a bigger liquid cooling system. Hope it will fix the thermal throttle! will  let you all know.

ya could also use a thermal grizzly contact frame !

So socket/cpu wont bend.

Dont screw cpu cooler to tight , it will probarly give issues.

Add enough cool paste , better a little to much then a little to less !!!

Check for thermal grizzly contact plate its for 12th / 13th and even for 14th gen lga1700 sockets.
Check manual (youtube video) about the force ya need to screw it down, it will lower temps and ya able to oc.

if ya did oc ya system already , use intel extreme utility and lower mhz by 200 till 400 , so it cool enough for now, till ya update system !

cheers

no, I never play with OC before, I would think this CPU with the 3080ti should be fast enough, I hope that fixing the cooling I can play  at full quality this game, thank you for your help!