Forum Discussion

Anonymous's avatar
Anonymous
7 years ago
Solved

BF V PC crash + unable to connect online

Hi all, I will try provide as much input as possible. Before the Overture update I had zero issues in playing BFV. Since the update I am facing multiple separate issues. 1) Infinite loading...
  • IICookieGII's avatar
    IICookieGII
    7 years ago

    @Mrazinjo

    Hi! Apologies for not coming back sooner! I actually lost this thread... so thank you for the reminder!

    Set your Link speed to the maximum possible - I use TP-links with Giga Ports allowing full 1.00 Gbps Full Duplex from the router which also has Giga ports. You may need to set yours accordingly. Your PC won't connect to the Internet/network if it is set to anything but what your port speed is. Most people have 100 Mbps Full Duplex selected, which is common.

    NIC Settings I use for gaming and general performance:

    • Gigabit Master Slave Mode - Auto Detect

    • Interrupt Moderation - Enabled

    • Jumbo Packet - Disabled

    • Large Send Offload V2 (IPv4) - Enabled

    • Large Send Offload V2 (IPv6) - Enabled

    • Legacy Switch Compatibility Mode - Disabled

    • Log Link State - Enabled

    • Maximum Number of RSS Queues - 2 (Or highest possible)

    • Packet Priority & VLAN - Enabled

    • recieve Side Scaling - Enabled

    • Wait for Link - Auto Detect

    • Energy Efficient Ethernet - Off

    • Ultra Low Power Mode when cable disconnected - off

    • Wake on Link Settings - off

    -------------------------------------------------------------------------------------------

    • All your Offload options - Enabled (You will see varying opinions on this one)

    -------------------------------------------------------------------------------------------

    • Adaptive Inter-Frame Spacing - Disabled

    • Flow Control - Rx & Tx Enabled

    • Interrupt Moderation rate - Adaptive

    • Recieve Buffers - 256

    • transmit Buffers - 512

    Hope the above is helpful in some way,

    Merry Christmas to you and your family!  😉

Anonymous's avatar
Anonymous
7 years ago

Hi @IICookieGII,

Oh no worries I am at work as well xD

If you could let me know what are your settings that would be perfect.

I am not treating this as a fix I am merely trying to tweak my NIC. BTW as we started a discussion about these things, yesterday I found out that my Ethernet cable was actually faulty as it kept connecting and disconnecting my internet connection, when touching it. It was bent on the connector, one problem less to handle.

I am sure I would benefit from doing this as I have a FTTC 240dl/24upl.

Thaaaaaaaaank you in advance!

P.S. I saw there are fixes on the way already at DICE_OFFICIAL on Reddit for crashes, map loading, etc. so I have no doubt things will get fixed by this coming Thursday.

IICookieGII's avatar
IICookieGII
Seasoned Veteran
7 years ago

@Mrazinjo tasty connection!

Your welcome! Merry christmas 😉

  • Anonymous's avatar
    Anonymous
    7 years ago

    *All of the issues mentioned above are now fixed after the update!*

    @IICookieGII

    Can you please let me know Cookie, those settings when you get the chance?

    Also if you are located in Europe we could play sometimes together if you wish.

    And I wish you and all of your family a Merry Christmas and all the best!


    • IICookieGII's avatar
      IICookieGII
      Seasoned Veteran
      7 years ago

      @Mrazinjo

      Hi! Apologies for not coming back sooner! I actually lost this thread... so thank you for the reminder!

      Set your Link speed to the maximum possible - I use TP-links with Giga Ports allowing full 1.00 Gbps Full Duplex from the router which also has Giga ports. You may need to set yours accordingly. Your PC won't connect to the Internet/network if it is set to anything but what your port speed is. Most people have 100 Mbps Full Duplex selected, which is common.

      NIC Settings I use for gaming and general performance:

      • Gigabit Master Slave Mode - Auto Detect

      • Interrupt Moderation - Enabled

      • Jumbo Packet - Disabled

      • Large Send Offload V2 (IPv4) - Enabled

      • Large Send Offload V2 (IPv6) - Enabled

      • Legacy Switch Compatibility Mode - Disabled

      • Log Link State - Enabled

      • Maximum Number of RSS Queues - 2 (Or highest possible)

      • Packet Priority & VLAN - Enabled

      • recieve Side Scaling - Enabled

      • Wait for Link - Auto Detect

      • Energy Efficient Ethernet - Off

      • Ultra Low Power Mode when cable disconnected - off

      • Wake on Link Settings - off

      -------------------------------------------------------------------------------------------

      • All your Offload options - Enabled (You will see varying opinions on this one)

      -------------------------------------------------------------------------------------------

      • Adaptive Inter-Frame Spacing - Disabled

      • Flow Control - Rx & Tx Enabled

      • Interrupt Moderation rate - Adaptive

      • Recieve Buffers - 256

      • transmit Buffers - 512

      Hope the above is helpful in some way,

      Merry Christmas to you and your family!  😉

      • Anonymous's avatar
        Anonymous
        7 years ago

        @IICookieGII

        Woah I did not expect such detailed info.

        Thank you! I will definitely have a look into it and experiment with the settings. Write down default values first and then start changing things bit by bit.

        BTW I will add you later on, so whenever you see me online just join. I have almost no people on Origin as I have just recently installed it for BFV.

About Battlefield V

Join the Battlefield V community to learn all you need to know. Find game information and updates, talk tactics and share Battlefield moments.15,338 PostsLatest Activity: 6 hours ago