Forum Discussion

Seasoned Vanguard

7 months ago

PSA: Mouse Input is broken in this game (looks similar to bad frame timing)

Mouse input is broken, which ruins an otherwise well optimised game. This looks to be getting confused with poor frame timing in a lot of threads, but controller input is unaffected. For reference...

lag

steam

MacGr00ber

Seasoned Rookie

7 months ago

Confirmed for me....GSYNC and REFLEX are BROKE. ***please read my entire post and my previous from a few hours ago**** I have it smooth in 120hz and 240hz @4k...but due to the nature of the problem I prefer the 120hz without framegen.

Just tested at 240hz as I mentioned I would from my comments earlier and I have 240hz mode working butter smooth now as well.

FYI* GSYNC is Broke
FYI* REFLEX is Broke with GSYNC OFF,
**GSYNC off is the only way I can get the mouse panning stutter to go away.

SO here are my two setups:

120HZ Gameplay @ 4k

NVCP GSYNC = DISABLED/FIXED FRAMERATE
NVCP VSYNC = ON
NVCP MAX REFRATE = Let Application decide
INGAME REFRATE = 119.998hz (there are two ~120hz choices, not sure why. I went with decimal one)
INGAME CAP = OFF
INGAME REFLEX = OFF
INGAME VSYNC = OFF
INGAME UPSCALING = OFF
INGAME FRAMEGEN = OFF
Visuals = ALL HIGH or BETTER, with several being overkill

240HZ Gameplay @ 4k

NVCP GSYNC = DISABLED/FIXED FRAMERATE
NVCP VSYNC = ON
NVCP MAX REFRATE = Let Application decide
NVCP LOW LATENCY MODE = ULTRA (Not limiting below refresh rate so I feel this aint working either but I still have it on.)
INGAME REFRATE = 240hz
INGAME CAP = 238.1
INGAME REFLEX = (DEFAULTS TO ON WITH FG 2x...but DOES NOT WORK as FPS still hit 240 without limiter)
INGAME VSYNC = OFF
INGAME AA = DLAA
INGAME UPSCALING = OFF
INGAME FRAMEGEN = 2x NVIDIA
Visuals = ALL HIGH or BETTER, with several being overkill

it WORKS LIKE BUTTER....Hasn't ran like this since launch

Even though running 2x FrameGen in 4k @ 240hz it still feels really good and not sluggish...but just use the 120hz method if you don't wanna framegen.

HOPE THIS CAN HELP SOMEONE!!!
I have posted TONS to twitter...with ZERO RESPONSES

morbide_666

New Veteran

7 months ago

I was about to skip your workaround since I tried so many in 1 week...AMAZING bro, you the KING ! The 240HZ method works for me (also using Quality DLSS), totally changing the experience and the feeling. Butter smooth on all maps and it is literally another game now !

I don't mind about Frame Gen X2 at all, don't feel it. I want my 240 FPS and they are all there, straight and stable with low frame time.

So GSYNC / REFLEX broken, will have to be somehow fixed but I am impressed about the overall performance and optimization for a BF release. Besides this issue, they made it pretty well.

So now, finally, my real release week end is starting ! CHEERS soldiers ! 🤩

MacGr00ber
Seasoned Rookie
7 months ago
You last sentence hit home with me bro...mine is just getting started. The game is amazing and I am truly in awe....they will fix it...I was just getting anxious.
Just helping a few people makes me the happiest person ... so thank you for the kind words and reply. Enjoy your game weekend and if you see MACGR00BER out there...hit me with a c5 jeep :-)
- morbide_666
  New Veteran
  7 months ago
  YOU DID IT ! just played a couple of games and had a blast. The BF I was waiting for since BF1, buttery smooth, ultra settings, 240 fps on OLED monitor... easy 😁(the 4090 helps a bit...).
  I can also feel that my kills are better registered and can play the way I want without being distracted by technical issues.
  So yes, disabling GSYNC with your 2nd method settings (but Quality DLSS), it is just perfect (1440P).
  I wish it could work for everyone here, because it is another game when it works as it should.
- Busdriverofdoom
  Rising Novice
  7 months ago
  Doesnt work for me unfortunatly...but thx sharing^^