SWTOR changes my desktop refrashrate.
Every time when i start SWTOR my desktop refreshrate changes to 144hz. Every gamesettings is set to 60hz mode and 60 fps cap. Even these cfg file from %appdata%. Its very frustrate me. I am using 6...
Forum Discussion
[Renderer]
AntiAliasingLevel = 2
AtlasQuality = 0
Buckets = 4
EnableSSAO = false
FullScreen = true
GraphicsDeviceId = 4100
GraphicsQuality = 6
Height = 1080
MeshLODQuality = 1
NativeHeight = 1080
NativeWidth = 1920
PerfTestFlags = 38780672
RefreshRate = 60
ShadowMapNumCascades = 4
ShadowMapResolution = 1024
SpeedTreeDistanceScale = 0.75
TextureAnisotropy = 8
Width = 1920
AllowDepthOfField = false
EnableBloom = false
PlantDensity = 0
WindowX = 0
WindowY = 0
doShadows = false
DYDDrawDistancePreset = 0
CodeVersionChanged = false
LastCodeVersionRun = 1
NewBucket = 4
AllowColorRemapping = true
ShaderSet = 9
TextureQuality = 0
D3DFullScreen = true
VerticalSyncState = false
doBlobShadows = true
[Game]
MoviesFolder = ..\..\Movies
SwtorRegKey = SOFTWARE\BioWare\Star Wars - The Old Republic
Can i just clarify why windows is using 60Hz as default , is that something you are doing intentionally ?
To look at basics first, The DVI cable you are using which one does it match in the image below for pin layout ?
Yes i use 60hz by default. Becouse i dont need 144/120/100 and i cant play all games with stable 120+ fps. So i dont neet it at all.
Not sure what exactly cable i using. But i can choose in windows any refreshrate and its works fine. I am just prefer 60hz.
Cable was with monitor when i bought it.
One more time - i played A LOT of other games with this monitor and system. Like 200++++ And NO such problems at all. Dont search problem from my side.
https://i.imgur.com/ZPRNqRK.pngupdated:
checked cable, its Dvi-D (dual)
- The next time you turn your computer off, find the cable from the monitor to the computer, unplug the cable from the computer end and note down what you think it is, now on the metal just above or below that socket it will say what type of connector it is as noted by Proxos666, it will be engraved into the metal.
If it doesn't show there, look in your graphics card manual or if your graphics is intergrated, the motherboard manual and find the specifications for the motherboard, it will say in that what the connectors are on the backend of the device. Ok thanks for the info
Swtor reads the EDID of the monitor i'm afaraid but need to work out why it is changing given you have 60Hz set in the client_setting file
Can you load the montir driver from Benq at this link if not used previously sometimes they include corrections to the EDID, just want to see if this stops the switching occurring.
It may be best to just not use ALT/Tab but use ALT/Enter to go into and out of fullscreen mode
I am already have this driver for monitor. Alt+Enter changes to 144hz too.
updt: u give me wrong driver. its for xl2411 i have xl2411Z. And driver is up to date. I am just checked.
