i've seen some of y'all do this, but i'm so dumb.how do you make a roof like this? the flat part in the center?https://78.media.tumblr.com/9f4131bc3fea3b366c85b76f3da7d841/tumblr_p2p54afT821v707rto1_540.png**update: i've sorta done it. i placed a room in the center of half hipped roof pieces. (??)probably not the right way to do this.https://78.media.tumblr.com/469f516677e8047b98d35ff665cbdbf9/tumblr_p2pf0rdrEv1v707rto1_1280.pngignore that it looks so cr*p, this build isn't going well. i'll either have to trash it or replace the dormers with deco dormers and see if that looks ok.tomorrow. :disappointed:

It is actually two roofs. The first is the hipped roof, where the windows and such are, the secondary roof is the half gabled roof, laid flat so it falls under the window. You then can have the two separate roof shingles, one for each piece.

I don't know the answer to your question, but I just wanted to say that what you've done so far looks really awesome!

Sorry, I thought you were trying something else.I never thought of that for a roof before, I do like it though. I am going to have to try it. I looks like they made a corridor room, down the center and used the half-gable roof to meet just under the top of the walls. Floored off the top of the building. The top part of the wall showing could have a dark brown boarder around the top. It gives me some ideas now.

So far, I have got this:http://i.imgur.com/B1tuJg4.jpg

@poltergeist I think what you’ve made is gorgeous. Well done!

Build help? How do I make this type of roof?

12 Replies

Gruffsman
8 years ago
It is actually two roofs. The first is the hipped roof, where the windows and such are, the secondary roof is the half gabled roof, laid flat so it falls under the window. You then can have the two separate roof shingles, one for each piece.
kuhpflanzen
Seasoned Ace
8 years ago
@Gruffman did you mean the edge of the roof under the dormers? i was confused about the big flat piece in the center of the roof, thanks tho.
alexspoom13
Seasoned Ace
8 years ago
I don't know the answer to your question, but I just wanted to say that what you've done so far looks really awesome!
kuhpflanzen
Seasoned Ace
8 years ago
"alexspoom13;c-16269991" wrote:
I don't know the answer to your question, but I just wanted to say that what you've done so far looks really awesome!

thanks. :sweat_smile:

"Dannydanbo;c-16270099" wrote:
I'm a builder and IMO what you have done is perfectly correct. If you are wanting the top edge of the roof to stop at the flat top, that will create a problem with your dormers. If you lower the roof top edge, the dormer roof will appear to peek over the flat roof.

Are these dormers needed? If, yes, then this is the best way to go. If they are not needed, delete the ones on that side roof at the flat top and replace them with nonworking dormers from GT (Windenburg). These can be placed more freely and will allow you to lower the top edge to better align with the flat roof.

I think how it looks now is great and very similar to the picture. You should be proud of your work.

yep, that is the exact issue i am having.
they aren't needed as living space, but they are needed to make the build not look so plain. i am going to try the deco dormers once i get back to it, but if they don't mesh well (and i don't have high hopes for them) then i'll start looking for another house.
thanks for the help.
Gruffsman
8 years ago
Sorry, I thought you were trying something else.

I never thought of that for a roof before, I do like it though. I am going to have to try it. I looks like they made a corridor room, down the center and used the half-gable roof to meet just under the top of the walls. Floored off the top of the building. The top part of the wall showing could have a dark brown boarder around the top.

It gives me some ideas now.
kuhpflanzen
Seasoned Ace
8 years ago
"Gruffman;c-16270397" wrote:
Sorry, I thought you were trying something else.

I never thought of that for a roof before, I do like it though. I am going to have to try it. I looks like they made a corridor room, down the center and used the half-gable roof to meet just under the top of the walls. Floored off the top of the building. The top part of the wall showing could have a dark brown boarder around the top.

It gives me some ideas now.

who's "they"? you mean, me? it's my build. or did you mean the house irl? :joy:
the white part is actually a white roof border, not a wall.

eta; here's a better look without the front roof piece
https://78.media.tumblr.com/70a346f73439ecea3a6de398ddb19376/tumblr_p2qbxgefYs1v707rto1_1280.png
Gruffsman
8 years ago
So far, I have got this:

http://i.imgur.com/B1tuJg4.jpg
Bonasita
7 years ago
@poltergeist I think what you’ve made is gorgeous. Well done!
kuhpflanzen
Seasoned Ace
7 years ago
@Bonasita thanks. :)
PsychoSimXX
New Spectator
7 years ago
Well I'd say did a pretty good job!!! I do have to ask though. Do you know you can change the height of the roof to match the height of the walls? It can be a bit tricky at times though. Still I think you did great job. FAR better than my first go at it!!!