[Xbox] WRC TH8A Shifter is not recognized
On xbox series x, I managed to detect my Thrustmaster TX steering wheel. However, the attached Thrustmaster TH8A shifter remains undetected, and I am unable to bind gears to it. Anyone has found a wo...
Forum Discussion
I had the same issue but found a solution. The TH8A needs to be plugged into the DIN input on the T300 base. If the sequential TH8A plate is on the shifter it will only pick up the shifter as a paddle shift so you can’t bind this as a handbrake. You need to swap the sequential plate for the H pattern plate. Once this is done your TH8A is now recognised as a H pattern gearstick. Go into bindings and unbind 4th gear. Go to handbrake and bind Handbrake as 4th gear. So now when you pull down on 4th you have a handbrake. You then need a pull cord or alastic band to allow the stick to pop out of 4th once pulled. If you don’t do this the stick will stay in 4th in other words handbrake will stay on unless put back in the neutral position. Also cover up the 3rd gear slot to stop the pull code pushing the stick into 3rd
@SidewaysFinn Interesting, does it allow you to assign 1st gear in the game to 1st gear with the H-Pattern cover? When I try that, the game never detects that the TH8A is in 1st or any other gear, so I can’t use it as an H-Pattern shifter.
