Crash to desktop.
@MrDakk wrote:
@TheShibatron
Are you overclocking? What are your current CPU BIOS settings? (GHz, voltage, etc.)
Yes. 5ghz on all cores with voltage set to 1.3v adaptive mode. Its stable on everything ive tested. After reading this thread, I decided to remove the overclock to see if the crashing stops. I havent played much yet to give a definite answer.
Drop your overclock. Either get rid of it or decrease it. I have a 8700K and was running stable in everything up until the recent patches in Apex. Dropped mine from 5GHz down to 4.4GHz and didn’t crash at all over ~6-7 hours. Today I bumped it up to 4.8GHz and have yet to crash after another ~7-8 hours. I reset my entire bios back to default when I decreased it as well. I enabled XMP, disabled EIST and Turbo Boost, and put the clock at the specified speed that’s all I touched this time around and I have yet to have a crash since doing so. 5GHz seems to be common culprit but other with higher clocks have crashed to. Not sure what changed in the code that’s triggering the game to crash so much now at high overclocks.
I have now played about ~16 hours and have yet to crash. Today I bumped my clock up to 4.8GHz from 4.4GHz and I think I’m staying there. Didn’t have a single issue at that clock for over 7 hours of playing. Highly recommend resetting to default bios settings or adjusting your overclock if you are still crashing a lot. The crashes described in this thread seem to be linked mainly to high overclocks.
Intel® Core™ i7-8700K CPU @ 3.70GHz
16 GB RAM
Windows 10
Message i got today new crash since season 3
crash:
{
R5Apex: 000000000029BC3D
EXCEPTION_ACCESS_VIOLATION(execute): 00007FF600000000
}
cpu: "Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz"
ram: 16 // GB
callstack:
{
KERNELBASE: 0000000000086B2C
ntdll: 00000000000A81CB
ntdll: 000000000008FD56
ntdll: 00000000000A477F
ntdll: 0000000000004BEF
ntdll: 00000000000A34EE
R5Apex: 000000000029BC3D
R5Apex: 0000000000458F06
R5Apex: 00000000004592F7
R5Apex: 0000000000457B87
R5Apex: 00000000004598B2
KERNEL32: 0000000000017974
ntdll: 000000000006A271
}
registers:
{
rax = 12
rbx = 1222 // 0x000004C6
rcx = 6
rdx = 1
rsp = 0x000000CA07947B30
rbp = 0x000000CA0794E520
rsi = 120
rdi = 0x000001D0AC7F7E80
r8 = 0x000000CA0794A190
r9 = 0x000001CE0107B020
r10 = 1872 // 0x00000750
r11 = 1
r12 = 1222 // 0x000004C6
r13 = 0x000001CE01083048
r14 = 0x000001CE01353C20
r15 = 0x000001CE010A7DB4
rip = 0x00007FF6D9D5BC3D
xmm0 = [ [28990416, 0, 0, 0], [0x4BDD2DE8, 0x00000000, 0x00000000, 0x00000000] ]
xmm1 = [ [28990416, 0, 0, 0], [0x4BDD2DE8, 0x00000000, 0x00000000, 0x00000000] ]
xmm2 = [ [13483573, 13483573, 311972.16, 311972.16], [0x4B4DBE35, 0x4B4DBE35, 0x48985485, 0x48985485] ]
xmm3 = [ [28990416, 0, 0, 0], [0x4BDD2DE8, 0x00000000, 0x00000000, 0x00000000] ]
xmm4 = [ [6087988, 0, 0, 0], [0x4AB9CA68, 0x00000000, 0x00000000, 0x00000000] ]
xmm5 = [ [13795545, 0, 0, 0], [0x4B5280D9, 0x00000000, 0x00000000, 0x00000000] ]
xmm6 = [ [1, 0, 0, 0], [0x3F800000, 0x00000000, 0x00000000, 0x00000000] ]
xmm7 = [ [13795545, 13795545, 13795545, 13795545], [0x4B5280D9, 0x4B5280D9, 0x4B5280D9, 0x4B5280D9] ]
xmm8 = [ [13795545, 13795545, 13795545, 13795545], [0x4B5280D9, 0x4B5280D9, 0x4B5280D9, 0x4B5280D9] ]
xmm9 = [ [-14961.9, 20566.234, -3519.4253, 0], [0xC669C79A, 0x46A0AC78, 0xC55BF6CE, 0x00000000] ]
xmm10 = [ [0, 0, 0, 0], [0, 0, 0, 0] ]
xmm11 = [ [0, 0, 0, 0], [0, 0, 0, 0] ]
xmm12 = [ [0, 0, 0, 0], [0, 0, 0, 0] ]
xmm13 = [ [0, 0, 0, 0], [0, 0, 0, 0] ]
xmm14 = [ [0, 0, 0, 0], [0, 0, 0, 0] ]
xmm15 = [ [0, 0, 0, 0], [0, 0, 0, 0] ]
}
build_id: 1569284646
---------------------------
Apex Crash - Overclocked/Overheated?
---------------------------
Apex crashed in a way usually caused by a CPU that is overclocked or overheating.
Specifically, the CPU reported that it couldn't execute an instruction it didn't want to execute. More precisely, the CPU's memory controller said it didn't have permission to execute one address, but the CPU's registers said it wanted to execute a different address.
More technical information should be available in "apex_crash.txt" in your Documents folder.
Ctrl+C in this window will copy this message so you can paste it as text.
---------------------------
OK
---------------------------
I didnt overclock and the CPU has normal temprature
No other game crashes. Only this one. BF5, FF14, COD. Nothing crashes only this game.
Hopefully someone can help me out cause i dont get anything from the crash.txt document
I had crashes since i got my new pc, i think it is mostly cause of my RTX 2070 but now it says its cause of my CPU dont really get it sadly.
Still hoping someone smart can help me out.
crash report
Community Manager
