Re: High Packet loss only on apex legends

Well with this tool its realy simple to fix your problem, dont worry it's nothing bad, I guarantee. This program not only fix your paket loss, it tweaks some setting for better gameplay/internet at all.

But if you wish, here is the second way to fix packet loss:

Finde the right mtu sice

1. open cmd as admin
2. type in: ping google.com -f -l 1492
3. if there is some paket loss reduce the number by -10 example:1482, 1472, 1462, 1452, 1442, 1432, ....

4. if you fund a number without loss, improve the number by +2 again to finde out the perfect falue

5. add to the mtu number 28 (1436 + 28 = 1464 )
6. remember the number

find your index number

• type in: netsh interface ipv4 show interfaces
• locate your network card/wifi dongle (it has to be 'connected' , mtu at 1500/1492)
• important at this point is the "idx" number of your network card (for this example its 11)

Set mtu to the right value

1. type in with your numbers of index and mtu: netsh interface ipv4 set subinterface 11 mtu=1464
2. done

I have a problem ive typed in every value from 1464(which is the lowest) to 1500(anything higher gave the same result) and i couldn't find the perfect value. Once i typed on 1472 and it had 75% loss i tried every number close to it and wouldnt give it again. Ive even tried to type 1472 again and it doesnt give 75% loss anymore it gives me 100% loss then.

@CrzpticWhy is 1464 the lowest? You need to go as low as necessary.

Ok but when i typed 1464 and lower ots would say "request failed" 3 times.

What 😕

if you go on this webside, it tells you your own ip adress: https://www.showmyip.com/ 

Is there a ipv6 as well? I just wanna know there is one or not, please don't write your ip down here.

Lol dont worry i know better than to write my own ip down for the world. And it says ipv6 not found

if you knew what I've seen.... better to have said it =D

It's realy confusing, you should be able to set your mtu as low as you want, 1400 for example. I Think there is a bigger problem with your conection, try to call your provider and tell them about your issues.