Forum Discussion

warmtofu's avatar
warmtofu
7 years ago

[PC] Apex Legends Stuttering/Hitching - FPS Drop/Frametime Spike

I7-7700 GTX 1070ti 16gb Ram Samsung 850 Evo SSD This game is phenomenal, which is why I am so pissed I can't play it. I honestly wouldn't care if it crashed every other game if it just ran smoo...
Sick1Click's avatar
Sick1Click
6 years ago

Hey guys i have the solution for your problems. Well, i had the same problem, Apex didnt run without lags. I start put all on low, overclocked my graficcard, set start settings etc. nothing worked.

But now i got it. This guide will work for all nvidia graficcard users and perfect with >120Hz monitors and low-end pc's (good result with my i5-4690k & gtx 1060) Ok lets start:

- downlaod Nvidia Inspector (from a trusted source)

- unpack it in a folder on your desktop ore where ever you want

- start "nvidiaProfileInspector.exe"

- left on top "Profiles", chose Apex Legends

- you need to change settings in register "2 - Sync and Refresh"

  • Maximum pre-rendered frames 1
  • Prefered Refreshrate: Highest available
  • Triple buffering: On
  • Vertical Sync: Force on
  • Vertical Sync Smooth AFR behavior: On
  • Vertical Sync Tear Control: Adaptive
  • Low Latency Mode: Ultra

Check "Apply changes" right on top.

--> Use the following start options in Origin for Apex Legends:
-dev -novid -high -fullscreen -freq 237 +fps_max 190
(this example is for a 240hz screen. For people with: a 144 Hz monitor: -freq 138 -fps_max 138 , with a 165 Hz: -freq 138 +fps_max 158 etc.)
 
--> enable gsync/freesync if its aviable for you
 

--> Navigate to:

C:\Users\* your username*\Saved Games\Respawn\Apex\local
(You can also just press the Windows key, type in "Games" and simply navigate through the folders)
 
--> Open the videoconfig, delete everything and insert this here (if your monitor has a resolution other than Full HD, adjust the two will in the config accordingly):
Spoiler
"VideoConfig"
{
"setting.cl_gib_allow" "0"
"setting.cl_particle_fallback_base" "-999999"
"setting.cl_particle_fallback_multiplier" "-999999"
"setting.cl_ragdoll_maxcount" "0"
"setting.cl_ragdoll_self_collision" "0"
"setting.mat_forceaniso" "0"
"setting.mat_mip_linear" "0"
"setting.stream_memory" "200000"
"setting.mat_picmip" "4"
"setting.particle_cpu_level" "0"
"setting.r_createmodeldecals" "0"
"setting.r_decals" "0"
"setting.r_lod_switch_scale" "0.30"
"setting.shadow_enable" "0"
"setting.shadow_depth_dimen_min" "0"
"setting.shadow_depth_upres_factor_max" "0"
"setting.shadow_maxdynamic" "0"
"setting.ssao_enabled" "0"
"setting.ssao_downsample" "3"
"setting.dvs_enable" "0"
"setting.dvs_gpuframetime_min" "4167"
"setting.dvs_gpuframetime_max" "4084"
"setting.defaultres" "1920"
"setting.defaultresheight" "1080"
"setting.fullscreen" "1"
"setting.nowindowborder" "0"
"setting.volumetric_lighting" "0"
"setting.mat_vsync_mode" "0"
"setting.mat_backbuffer_count" "0"
"setting.mat_antialias_mode" "0"
"setting.csm_enabled" "0"
"setting.csm_coverage" "0"
"setting.csm_cascade_res" "512"
"setting.fadeDistScale" "1.000000"
"setting.dvs_supersample_enable" "0"
"setting.gamma" "1.000000"
"setting.configversion" "7"
"setting.modeldecals_forceAllowed" "-1"
}
--> Save the video configuration and the editing of a right click on the file, put a check mark next to "read only" and press belong. From now on you don't want to be able to change any video settings in the game, but that doesn't really matter. If it works, you don't have to change anything. It is important to use the write protection here, otherwise the entire config will be changed again with the slightest change to the video settings in the game. Do not be surprised, all settings are now on "Low", the game is now almost suitable for e-sports.
Ok thats all. You are welcome to give me feedback and just write to me if you have any questions.
 
Greetings and good luck!
 
(btw. if u want much more fps set "setting.stream_memory" "200000" to "setting.stream_memory" "000000")
  • EA_Blueberry's avatar
    EA_Blueberry
    Icon for Community Manager rankCommunity Manager
    6 years ago

    @Sick1Click 

    "- set all ingame settings in Apex to low"

    Do you see any impact to FPS if you increase your graphical settings to medium or higher? Appreciate the detailed solution you posted for others here, however I'm not sure if many players will want to visually play on low settings.

    Thanks for the contribution. 👍

    • T0toro21's avatar
      T0toro21
      6 years ago

      Hey, I'll try the fullscreen optimization tweak tonight.

      Copy/paste from my post in a similar topic:

      Was looking to post a similar stuttering issue.

      Completely resolved by lowering my screen refresh rate to 100hz..

      Wanted to ask if someone could help to get back to 144hz without those unplayable stutters.

      Config : I5-7600 / RTX 2070 Super / 16go RAM

  • Zer0_Calculati0's avatar
    Zer0_Calculati0
    6 years ago
    @Sick1Click thanx man very much. this is the only solution worked for me . i thought it gonna give me high input lag but it didnt . iam using adaptive vsync on game instead of triple buffering
    • Sick1Click's avatar
      Sick1Click
      6 years ago

      @Zer0_Calculati0N nice that i could help you 🙂

      @EA_Blueberrythis solution is not for a high end pc by the way. with my new pc i dont need that manual. to put all on low gives you a smother gameplay, its not all about fps, the subjective feeling is much more important.

  • PlayingOnEmotio's avatar
    PlayingOnEmotio
    5 years ago

    the link you provided is a virus i downloaded it and got a bunch of other malware and pop up ads on my browser and computer itself. 

    Delete this so called *guide*.

  • Zaares's avatar
    Zaares
    5 years ago

    Vertical Sync: Force on

    How can you recommend turning Vsync in a fast competitive FPS game like Apex?

About Apex Legends Technical Issues

Having issues with Apex Legends? Join here to find help with connectivity, performance issues, crashes and more.37,301 PostsLatest Activity: 22 minutes ago