With Update 8.8.0 on Battlefield 2042, we will require that Secure Boot be enabled for PC hardware that can support it. This will provide you with a higher standard of trust and safety while you play select EA titles. As cheat developers keep evolving their tactics, we're stepping up our game, too.

To keep Battlefield 2042 fair and fun for everyone, we're strengthening our defences, especially against cheats that try to sneak in during the Windows boot process. This move supports our Positive Play commitment and helps ensure a level playing field for all players.If you attempt to load the game following Update 8.8.0 without Secure Boot enabled, but are on a piece of hardware that supports it, you will be prompted with a message stating that Secure Boot is required. Secure Boot is a feature available for Windows 11 and Windows 10 devices, and you can learn more about how to enable this functionality via our EA Help article here.

(‼️At Your Own Risk‼️) How to Reset Secure Boot if Battlefield 2042 Does Not Recognise It

Before you proceed, consult your motherboard manual for precise steps. BIOS/UEFI menus vary by manufacturer. EA is not responsible for any damage or loss of data.

‼️This is at your own risk.‼️ Incorrect changes to BIOS/UEFI can render your system unbootable.
Verify that Secure Boot, not just UEFI boot, is required.
Ensure your system boots properly with CSM (Compatibility Support Module) disabled.
‼️Consult your motherboard manual‼️ for precise steps. BIOS/UEFI menus vary by manufacturer. EA is not responsible for any damage or loss of data.

Steps to Reset Secure Boot

Enter BIOS/UEFI Settings
- Restart your PC and press the designated key (usually DEL, F2, ESC) to enter BIOS/UEFI.
Locate Secure Boot Settings
- Navigate to the Security or Boot tab.
Assess the Current Secure Boot State
- If the Mode is User, you can usually enable Secure Boot directly.
- If the Mode is Setup, follow these steps:
  - Disable Secure Boot (if it says Enabled).
  - If it shows Standard, switch to Custom.
  - Then switch back from Custom to Standard, and accept factory defaults.
  - Enable Secure Boot.
Optional: Reset Secure Boot Keys
- In some BIOS/UEFI versions, you can select Reset/Delete Secure Boot Keys under the Secure Boot settings.
Save and Exit BIOS/UEFI
- Save your changes and restart your computer.
Verify Secure Boot Status in Windows
- Press Windows + R, type msinfo32, and press Enter.
- In System Information, check the Secure Boot State field.
  - If it says On, Secure Boot is enabled and recognised by Windows.
  - If it says Off, revisit the BIOS to adjust settings.
  - If it says Unsupported, your hardware may not support Secure Boot.
Restart and Launch Battlefield 2042
- Launch the game to check if Secure Boot is now recognised.

Please also see:

Final Warnings:

Follow your motherboard’s manual. BIOS/UEFI instructions can vary greatly.
Making incorrect BIOS/UEFI changes may prevent your system from booting.
EA is not responsible for any system damage or data loss.