Invalid Pointer and Access Violations (CRASH)
Again i’m reaching out to share my frustration with Battlefield 6 and the consistent crashes I’ve been encountering. After performing various hardware tests (including MemTest86, stress tests, and ve...
Forum Discussion
HyroPlay try lowering memory frequency to 2400MHz. Keep the memory timings at their current value of 16-22-22-52 and don't change them.
See if BF6 stops crashing.
Error Code: 0xC0000005 is usually caused by memory errors due to unstable memory.
If I don't reply to your post then personal message me. Sometimes the forum fails to notify me when someone replies.
Okay, I'll try that, but... curiously, I ran Memtest86 last night to check the memory, and surprisingly, it passed without errors...
I'll send the complete file, but here's the final part ->
"2026-01-04 03:33:46 - get_mem_ctrl_timings - [0-0-0] 3192 MT/s (16-22-22-52)
2026-01-04 03:33:46 - Current mem timings: 3192 MT/s (16-22-22-52)
2026-01-04 03:33:46 - Current CPU temperature: 35C
2026-01-04 03:34:03 - RunHammerTest - Running hammer test on 4 CPUs (512MB each) [0x800000000 - 0x880000000]
2026-01-04 03:34:41 - MtSupportRunAllTests - Test execution time: 387.499s (Test 13 cumulative error count: 0, buffer full count: 0)
2026-01-04 03:34:41 - Finished pass #4 (of 4) (Cumulative error count: 0, buffer full count: 0)
2026-01-04 03:34:41 - Cleanup - Unlocking all memory ranges...
2026-01-04 03:34:41 - All memory ranges successfully unlocked
2026-01-04 03:34:43 - Test result: PASS (Errors: 0)"
thanks the attention
Featured Places
.png){kind=link}